VEVOR 2.2KW 220V VFD Variable Frequency Drive Inverter for Spindle Motor Speed Control (2.2KW 220V)
Questions and Answers
Q: Can this be used with bldc motor? If not do you have any vfd for bldc motor?
Answer This Question
A: No, it can't be used with bldc motor, and we currently do not have this type of vfd.
by
vevor
on
Helpful (0)
Q: Hello Can I control the0.8 KW or 1.5KW air cooled cnc spindle motor with VEVOR 2.2KW 220V VFD?
Answer This Question
A: Yes.
by
vevor
on
Helpful (0)
Q: Hello!
I bought an A2-8022 inverter to control a VEVOR 2.2KW air cooled AC motor.
2.2 KW Water Cooled Spindle Motor
Power: 2.2 KW
Voltage: 220V~250V
Frequency: 400 Hz
Speed: 8000-24000 R/min
Runout off: Less than 0.005 mm
Product Dimensions: 3.15 x 8.5 in / 8 x 21.5 cm
Weight: 11 lbs / 5 kg
Please, if it is convenient for you, send the optimal - the basic settings of the inverter. Pn -01 to Pn-23.
Answer This Question
A: The default parameter is this. If you change the parameter pn32=3, then you can restore the default parameters. The default parameters are panel Run to start, panel Stop to stop, and panel up and down buttons to adjust the speed.
by
vevor
on
Helpful (0)
Q: I need to operate/test a special relay coil with 230 V AC at 16,7 Hertz (Railway in Sweden operate at this frequency where I work). The coil also need 48 V DC together with 230 V AC at 16,7 Hertz, but the DC part is and easy fix with a power supply.
Can i use this frequency converter and only use one of the output phases for this test or will that destabilize the machine output?
Answer This Question
A: No, the inverter can only be used for three-phase motors.
by
vevor
on
Helpful (0)
Q: Dear Sirs,
If I want to operate this drive with 1 phase motors, can I connect it between U-W terminals?
Thank You!
Answer This Question
A: This is not feasible. Inverters can only be used for three-phase motors.
by
vevor
on
Helpful (0)
Your search did not return any results, please check your spelling and try again.